阿里巴巴 博客

 our company undertake order to make    12.5m vtl  (lathe and milling center )

 if you are interesting  in it  please contact via mobile : 18603796868 (24h)

Machine main parameter and performance : 

Max slewing dia:  12500 mm

Max working height:5000mm

Table dia:8000mm

Max table loading capacity :  400T (rated revolution)

Table R.P.M.:  turning  0.155~15.5 r/min

             Minlling  graduatedly  0.0002~0.2 r/min

Max table torque : 650Knm

Turret maximum cutting force : L<=600mm   125KN

                            (L:RAM OUT LENGTH)                  

                         MAX  RAM OUT : 16KN

spindle of milling on tool rest  max torque : 2000Nm

r.p.m of milling on tool rest  spindle : 10-600 r/min

taper hole of milling of tool rest  : iso 50

Ram section of tool rest : 400x400mm²

feed rang of tool rest horizontal ,ram vertical :

0.1 mm/min  0.05~50  

Fast move of tool rest horizontal ,ram vertical: 4000 mm/min

Knife shelf Horizontal travel distance :-100~+7050 mm

RAM of knife shelf max travel distance : 3150mm

Max over travel of  center line  of knife shelf cross table center line  : 100mm 

Max section size of  lathe cutter arbor : 100x100 mm²

Beam travel distance : 4000mm

Speed of beam travel distance  : 300mm/min

Walking board vertical travel distance: 5000mm

Walking board horizontal travel distance: 3500mm

Dimensions :

Height off ground : 13080mm

Total height: 17110mm

Total width: 9300

Total length: 22640mm

NC: SIEMENS 802D

total motor capacity :~340kw

Main motor: 143kw

table graduation motor : 12.4kw , 79Nm , rpm 1500

motor of cutter shelf and ram feed : 12.1kw ,58Nm，rpm 2000

motor of milling on cutter shelf spindle: 39kw , rpm 1000-500

motor of beam up ,down : 30kw , rpm :980

motor of beam clamped oil pump station : 2.2kw rpm : 1430

motor of table hydrostatic slideway : 15kw rpm:970

motor of table clamped oil pump ：2.2kw  rpm :1430